Exterior Frames Model 103

Standard Features of the 103 Frame
  • Heavy duty aluminum extrusions
  • 3/8" channel allows for poster board insert up to 1/4" thick
  • Drain holes in bottom runner
  • Sharp edges rounded for safety
  • Mounting holes located and type A self-drilling sheet metal screws supplied.
  • Natural anodized finish standard - other custom finishes including powder coat available upon request

End Load Model: As with all end load frames, either end piece is removable to change the advertising message. The unique feature of the 103, however, is the pus button bracket. Identified as part #1009, it is located at the top end of each piece. By depressing the pin, the end piece is easily removed without requiring any tools. At the bottom of each piece, part #1006 stationary pin bracket is used. Built to last, both brackets are made of heavy 15 gauge steel, while the pins, retainer rings and springs are made of stainless steel. Popular card sizes using the end load feature include Kings (30" x 144"), Queens (30" x 88") and rears (21" x 70" or 72"). Special sizes are available upon request. When more security is required for removable end pieces, the solution is the #1005 bracket in place of the #1009 push button bracket. The #1005 features a machine screw instead of a pin and requires a screwdriver to change the message. For end load frames, it is desirable to locate the frame approximately 1/2" from the skin of the coach to allow easy loading. This is accomplished by installing the #1064 aluminum spacers. Please note that on end load frames, sing corners must be cut at a 45º angle approximately 1" from the corner in order to clear the corner pin assembly.

Bottom Load Model: The #1005 bracket is used at the two top corners while an .050" aluminum plate is riveted at the two bottom corners. The bottom wall is designed with cutouts to allow the sign to slide up into the frame, and then drop into place. The standard size for most bottom load frames is 21" x 44". When used on a 21" x 72" rear frames, extra cutouts are provided for easy loading. Special sizes are available upon request.

 

 

How To Order!
  • Specify 103 extrusion
  • Specify card height & card width (poster size)
  • Specify end load or bottom load
  • Specify finish
  • Advise if #1064 spacers are required for end load frames
  • Brackets available for front frame

 

Next Page
Previous: Model 103A
Next: Model 106 Interior

 

TEST DRIVE THE NATIONAL GUARD MODEL TODAY! CALL 1-800-647-7874


National Guard Products, Inc. * 4985 East Raines Rd. * Memphis, TN 38118
Fax 1-800-255-7874 * E-Mail NGPINFO@NGPINC.COM